Building Canada’s Next Gold Mining District

TMAC’s Initial Drilling at Boston Intersects 15.3 g/t Gold over 22.3 Metres


TORONTO--(BUSINESS WIRE)-- TMAC Resources Inc. (TSX: TMR) (“TMAC” or the “Company”) is pleased to report that the first drilling campaign at the Boston Deposit, located in the south of its 100% owned Hope Bay Project, has intersected significant high-grade gold mineralization over wide widths. The on-going, initial drilling is designed to extend wide, high-grade trends within the current resource model. In addition, ongoing drilling at Doris below the dyke (“Doris BTD”) continues to intersect high grade gold over mineable widths and the underground development there confirms the continuity of the ore bearing structures at depth below the diabase dyke.

This Smart News Release features multimedia. View the full release here:

Figure 1: Boston plan view illustrating the general geological setting and location of the B2, B3 an ...

Figure 1: Boston plan view illustrating the general geological setting and location of the B2, B3 and B4 mineralized zones. Section Lines A-A’ and B-B’ Refer to Figures 2 and 3.

Highlights Boston:

-- TMB0001   Boston B2   15.3 g/t Au over 22.3 metres
Including 36.6 g/t Au over 4.5 metres
And 18.9 g/t Au over 6.3 metres
And 20.6 g/t Au over 2.6 metres
-- TMB0003 Boston B2 17.3 g/t Au over 2.1metres
-- TMB0007 Boston B2 8.9 g/t Au over 8.9 metres
And 5.9 g/t Au over 8.7 metres

Highlights Doris BTD:

-- TM50058 Doris BTD 10.7 g/t Au over 2.0 metres
-- TM50077 Doris BTD 33.8 g/t Au over 3.8 metres
And 15.3 g/t Au over 2.3 metres
-- TM50078 Doris BTD 77.0 g/t Au over 0.7 metres
-- TM50085 Doris BTD 5.7 g/t Au over 21.2 metres

Dr. Catharine Farrow, Chief Executive Officer of TMAC, stated, “Since acquiring the Hope Bay Project in 2013, we have focussed on Doris and patiently waited to initiate a major exploration campaign at Boston until we had the Doris mine in commercial production. Having achieved that effective June 1st, we recommissioned the Boston camp located about 60 km south of the Doris complex and initiated our first drilling program there this summer. Initial drilling results, such as drill hole TMB0001, intersecting 15.3 g/t Au over 22.3 metres, are very encouraging and confirm Boston’s high-grade potential along-strike and down plunge.”

She added “The Doris BTD underground development is progressing as planned and sill development has commenced on the upper levels of the BTD East Limb. The underground development on the Doris BTD East Limb confirms its location and the continuity of the ore-bearing structures under the diabase dyke and the on-going underground drilling confirms the high grade potential of both the Doris BTD East Limb and the Doris BTD Extension zones. Two drill rigs will continue to operate in these areas for the remainder of the year, once the annual sealift re-supply is complete.”

Boston Deposit

The Boston Deposits are hosted within a regional-scale south-plunging fold (synformal or overturned anticline) that is cored by a sequence of mafic metavolcanic rocks and flanked by an extensive metasedimentary rock domain (Figure 1). There are a number of sub-units within the mafic package including variolitic and non-variolitic metabasaltic units, intercalated interflow metasedimentary units, gabbro, picritic sills, and felsic dykes. The metasedimentary rocks typically range from fine-grained argillites to quartzo-feldspathic wackes. Gold mineralization at the Boston deposits are hosted within a series of axial-planar, sub-parallel anastomosing high-strain domains referred to as B2, B3, and B4 zones (Figure 1). Within these zones, gold mineralization occurs within and around structurally controlled quartz-carbonate-tourmaline veins, which are generally developed along lithological contacts. Gold is associated with an alteration assemblage comprising paragonite-sericite, iron carbonate, and sulphides with a distal assemblage primarily of chlorite and calcite.


The B2 zone is developed along the western contact of the mafic metavolcanic package and metasedimentary rocks. A transitional breccia domain occurs at the contact, which is characterized by mafic-dominated peperitic breccias and hyaloclastites with increasing argillite content with distance from the metavolcanic contact. Gold mineralization within the B2 zone is associated with multi-stage quartz-carbonate veins with minor tourmaline and sulphides, within a wider iron carbonate alteration assemblage, 10-20 metres surrounding the quartz veins. Collectively the B2-B3-B4 zones would form an alteration footprint 200 – 300 metres wide on surface. Gold is hosted both in quartz veins as well as in their adjacent alteration selvages within wallrock.


Gold mineralization within the B3 zone is present in an altered domain parallel to the B2 zone and is composed of a stockwork of quartz-carbonate veins within highly-strained metabasaltic rocks along the margins of an ultramafic sill. Gold mineralized intervals occur in boudinaged lenses marked by intense quartz-carbonate-sulphide alteration.


The B4 zone is developed along the eastern contact of the mafic metavolcanic package and the metasedimentary rocks. Similar to the B2 zone, gold mineralization within the B4 zone is associated with a transitional breccia domain that exists along the mafic metavolcanic-metasedimentary rock contact. Gold mineralization within the B4 zone is associated with multi-stage quartz-carbonate veins with minor tourmaline and sulphides, within a wider iron carbonate alteration assemblage.

Boston Exploration Drilling

The objective of the 2017 program at Boston was to provide further understanding of the geological controls on gold mineralization and demonstrate the potential to add significant high-grade gold ounces to the Boston Mineral Resource base at shallow depths. Equipment and supplies required to support the diamond drilling program at Boston were mobilized in the first quarter of 2017. The camp was recommissioned late in the second quarter, and drilling, sampling and support personnel were mobilized to site in mid-June. The Boston Deposit Measured and Indicated Mineral Resources total 3.71 million tonnes grading 9.2 grams per tonne (“g/t”) gold (“Au”), containing 1.1 million ounces of gold, of which approximately 0.87 million ounces are contained in the B2 zone. The B2 zone Measured and Indicated Mineral Resources extend from surface to the 350 metre level, and are open at depth. Widely-spaced historical drilling below the current Mineral Resources have intersected significant mineralization, including drillhole 11SBD414A, which intersected 28.5 g/t Au over 7.1 metres, 17.3 g/t Au over 4.8 metres, and 46.6 g/t Au over 7.8 metres, and drillhole S03-293, which intersected 56.6 g/t Au over 8.7 metres at the 1020 metre level (Figure 2). The TMAC 2017 exploration program includes two surface drills focused on targeting wide, higher grade trends within the current Boston Mineral Resources. Figure 2 illustrates the TMAC drillholes from the current drilling program and historical intersections of greater than 5 g/t Au over greater than five metres, highlighting the wide high grade trends within the known Mineral Resources. Significant results to date include drillhole TMB0001, which intersected 15.3 g/t Au over 22.3 metres, including 36.6 g/t Au over 4.5 metres, 18.9 g/t Au over 6.3 metres, and 20.6 g/t Au over 2.6 metres. A summary of the assay results received to date is provided in Table 1 and drillhole locations are illustrated in Figures 2 and 3. The Boston exploration program is funded under the flow-through financing completed on March 18, 2016. As of the first week of August, TMAC’s flow through financing commitments have been met and the Boston program will be completed by August 12, 2017 at which time the camp will be closed for the balance of the 2017 season.


Boston - TMAC 2017 Intersections











(Au g/t)2


(Au g/t)2

TMB0001   B2   285.0   -65.0     50.80   73.10   22.30   22.42   15.27
B2 Including 50.80 55.30 4.50 72.03 36.59
B2 and 59.75 66.00 6.25 18.85 18.85
    B2           and   70.50   73.10   2.60   20.63   20.63
TMB0002 B3 55.0 -55.0 30.67 32.00 1.33 21.20 21.20
B3 and 105.55 106.70 1.15 5.88 5.88
    B3           and   186.60   188.00   1.40   4.72   4.72
TMB0003 B2 285.0 -50.0 38.00 40.05 2.05 17.27 17.27
    B2           and   45.50   45.83   0.33   4.83   4.83
TMB0004   service hole         no significant assays
TMB0006 B2 285.0 -53.0 77.05 79.73 2.68 6.63 6.63
    B2           and   101.00   102.50   1.50   13.20   13.20
TMB0007 B3 285.0 -68.0 47.38 49.77 2.39 9.23 9.23
B3 and 55.70 56.21 0.51 12.90 12.90
B2 and 197.20 199.46 2.26 4.12 4.12
B2 and 210.00 218.92 8.92 8.84 8.84
    B2           and   227.30   236.00   8.70   5.92   5.92

1 True width varies depending on the dip of the drill hole. Drill holes were designed to intersect target zone(s) at as close to a perpendicular orientation as possible, therefore, true widths are estimated to be approximately 45% to 85% of down hole widths.
2 Individual assay values presented cut and uncut (when applicable) with individual values capped at 100 g/t Au.

Doris Deposits

The Doris Trend is a north-south oriented structural trend developed within Archean-aged, mafic metavolcanic-dominant, host rocks. The Doris gold mineralization occurs at the contact between two mafic metavolcanic units, a high-titanium metabasalt and a high-magnesium metabasalt in either quartz vein or within shear breccia. The drill results reported are from the most northern known extent of the Doris Trend, below the diabase dyke (Figure 4). The current known high-grade mineral resources at Doris North Hinge zone (Measured and Indicated Mineral Resources of 371,000 tonnes grading 19.5 g/t and containing 233,000 Au ounces) are located above the diabase dyke and extend to a depth of only 160 metres. Local parallel structures above the diabase include the West Valley Wall (“WVW”) veins, that also have future exploration potential. The Doris BTD zones are the extension of the Doris North zone, below a late, locally relatively flat-lying diabase dyke that bisects the known gold mineralization at Doris into upper and lower elevations. Initial mineral resources below the dyke from the Doris BTD Zones were reported in the June 30, 2017 Mineral Reserves and Mineral Resources statement, and include the high grade Doris BTD East Limb (Indicated Mineral Resource of 68,000 tonnes grading 18.3 g/t Au, containing 40,000 ounces of gold). The Doris BTD zones are further subdivided into the Doris BTD East Limb and Doris BTD Extension, separated by the northwest-striking North Fault. The Doris BTD Extension is interpreted as the down-dropped continuation of the Doris North zone “Hinge” structure on the north side of the North Fault, beneath the diabase dyke. The Doris BTD East Limb is interpreted as the down-dip continuation of the Doris North East Limb mineralization, south of the offsetting North Fault and beneath the diabase dyke. TMAC believes the Doris BTD exploration areas have the potential to add significant high grade gold ounces to the Doris North Mineral Resources with continued drilling and underground development.

Doris BTD Exploration Drilling

Drilling below the dyke commenced in early March with exploration drilling south of the known Doris BTD East Limb and Doris BTD Extension resources, and initial drilling results were reported in May. The Doris BTD access ramp has subsequently reached the area of the Doris BTD East Limb Mineral Resources and drilling has continued with two underground rigs. The results reported here are from the remaining exploration drillholes south of the known Doris BTD East Limb Mineral Resources, as well as initial infill and expansion drilling on the Doris BTD East Limb and southern portion of the Doris BTD Extension. Although the ore-bearing structure continues to the south of the known Doris BTD East Limb Mineral Resources, grades show limited continuity or low gold grades have been intersected during the 2017 drill campaign. A summary of the assay results received since the May update are provided in Table 2 and drillhole locations are illustrated in Figure 5. Highlights from the current phase of drilling include drillhole TM50077 which intersected 33.8 g/t Au over 3.8 metres and 15.3 g/t Au over 2.3 metres, and TM50085 returning 5.7 g/t Au over 21.2 metres. To date, approximately 13,140 metres of the 20,000 metres budgeted have been completed in a total of 53 diamond drill holes. For camp space considerations during the 2017 sealift period, drilling has been suspended and will resume once the sealift operations are complete. The next phase of Doris BTD drilling will target infill and expansion drilling on the high grade Doris BTD Extension on the north side of the North Fault (Figure 5).


Doris BTD - TMAC 2017 Intersections
DRILL HOLE   ZONE   AZIMUTH (degrees)   DIP (degrees)   Inclusion   FROM (m)   TO (m)   CORE LENGTH (m)1   ASSAY (Au g/t)
TM50045*   Doris BTD WVW   125.0   -65.0     62.55   63.05   0.50   6.13
Doris BTD East Limb and 315.22 319.50 4.28 2.59
                Including   316.50   317.60   1.10   4.20
TM50046* Doris BTD East Limb 125.0 -55.0 224.93 236.57 11.64 1.12
Including 224.93 225.93 1.00 4.17
                Including   232.70   233.35   0.65   4.00
TM50047* Doris BTD East Limb 100.0 -57.0 219.77 225.93 6.16 1.71
                Including   222.70   224.55   1.85   3.88
TM50048* Doris BTD East Limb 100.0 -70.0 387.56 397.96 10.40 1.96
Including 388.52 389.65 1.13 5.84
                Including   396.36   397.96   1.60   4.69
TM50049* Doris BTD East Limb 140.0 -50.0 217.06 237.54 20.48 4.22
Including 224.82 226 1.18 40.50
                Including   231.00   233   2.00   9.88
TM50050* Doris BTD WVW 140.0 -56.0 77.91 79.00 1.09 9.13
Doris BTD East Limb and 281.00 294.05 13.05 4.96
Including 286.40 286.90 0.50 14.50
                Including   292.30   294.05   1.75   14.19
TM50051* Doris BTD East Limb 140.0 -65.0 410.80 413.85 3.05 7.04
                Including   410.80   412.30   1.50   11.40
TM50052   Doris BTD East Limb   99.6   -42.0       174.80   179.17   4.37   1.16
TM50053                               NSV
TM50054   Doris BTD East Limb   98.2   64.9       224.15   224.75   0.60   5.79
TM50055                               NSV
TM50056   Doris BTD East Limb   83.3   -53.5       197.44   198.42   0.98   0.49
TM50057   Doris BTD East Limb   86.4   -24.9       119.05   122.57   3.52   0.70
TM50058 Doris BTD East Limb 82.8 -61.3 224.56 226.50 1.94 10.68
                Including   224.56   225.50   0.94   18.35
TM50059 Doris BTD East Limb 86.9 -36.7 143.12 146.39 3.27 7.32
                Including   143.12   144.05   0.93   18.00
TM50060   Doris BTD East Limb   80.5   -69.1       257.77   260.96   3.19   2.44
TM50061   Doris BTD East Limb   85.0   -44.0       159.57   161.43   1.86   1.58
TM50062   Doris BTD East Limb   84.7   -50.3              

No Significant Assays

TM50063 Doris BTD East Limb 130.0 -64.2 305.00 311.00 6.00 7.72
                Including   306.50   309.50   3.00   12.08
TM50064   Doris BTD East Limb   99.0   -36.0       132.50   135.30   2.80   3.19
TM50065   Doris BTD East Limb   96.2   -25.9       114.54   118.80   4.26   1.97
TM50066   Doris BTD East Limb   101.3   -45.7       153.18   155.11   1.93   2.59
TM50067 Doris BTD East Limb 143.0 -56.6 337.00 340.70 3.70 7.60
                Including   338.50   339.50   1.00   21.90
TM50068 Doris BTD East Limb 119.4 -38.3 147.00 149.96 2.96 3.10
                Including   149.04   149.96   0.92   9.75
TM50069 Doris BTD East Limb 122.0 -26.6 122.68 127.18 4.50 5.21
                Including   126.00   127.18   1.18   18.45
TM50070 Doris BTD East Limb 123.6 -46.9 159.91 162.27 2.36 5.46
                Including   160.75   161.43   0.68   11.50
TM50071 Doris BTD East Limb 143.0 -52.5 271.90 273.00 1.10 3.89
                and   281.25   282.00   0.75   4.98
TM50072   Doris BTD East Limb   107.3   -17.7       92.57   93.14   0.57   85.10
TM50073   Doris BTD East Limb   143.0   -48.7       255.28   256.17   0.89   2.80
TM50074   Doris BTD East Limb   107.8   -29.0       117.54   118.10   0.56   10.40
TM50075A Doris BTD Extension 106.0 -41.0 99.82 103.82 4.00 4.53
Including 101.00 102.00 1.00 16.45
    Doris BTD East Limb           and   142.00   146.61   4.61   0.89
TM50076 Doris BTD East Limb 156.0 -45.2 346.63 357.00 10.37 6.10
Including 351.00 353.46 2.46 18.27
                and   362.00   367.50   5.50   4.84
TM50077 Doris BTD Extension 105.4 -46.5 110.50 114.27 3.77 33.84
Including 110.50 112.21 1.71 117.26
    Doris BTD East Limb          


  129.24   131.50   2.26   15.34
TM50078   Doris BTD East Limb   105.4   -4.5       95.30   96.00   0.70   77.00
TM50079   Doris BTD East Limb   94.7   -12.6       102.76   112.30   9.54   0.23
TM50080 Doris BTD Extension 94.0 -31.8 135.98 144.12 8.14 5.31
Including 135.98 136.87 0.89 15.80
                Including   140.40   141.10   0.70   18.60
TM50081   Doris BTD East Limb   94.9   -26.4       85.27   85.70   0.43   15.00
TM50082   Doris BTD NE Fault   84.6   -5.7              

No Significant Assays

TM50083 Doris BTD Extension 94.0 -38.8 150.15 153.10 2.95 1.77
and 158.35 166.64 8.29 1.12
                and   171.75   173.25   1.50   2.47
TM50084   Doris BTD NE Fault   79.6   -18.5              

No Significant Assays

TM50085 Doris BTD Extension 107.0 -31.0 129.80 151.00 21.20 5.65
Including 132.82 133.82 1.00 57.40
                Including   149.48   151.00   1.52   14.75
TM50087 Doris BTD Extension 107.0 -36.0 155.26 170.20 14.94 1.91
Including 156.50 158.00 1.50 10.15
                Including   166.50   168.00   1.50   6.10
TM50088   Doris BTD Extension   105.0   -30.0       126.53   128.04   1.51   2.94

* TMAC underground drill hole previously reported in 23/5/2017 release.
1 True width varies depending on the dip of the drill hole. Drill holes were designed to intersect target zone(s) at as close to a perpendicular orientation as possible, therefore, true widths are estimated to be approximately 45% to 85% of down hole widths.


TMAC holds a 100% interest in the Hope Bay Project located in Nunavut, Canada. TMAC is an emerging gold producer with the Doris Mine pouring first gold in the first quarter of 2017 and achieving commercial production in the second quarter of 2017. The Madrid and Boston properties are expected to commence production in 2020 and 2022, respectively. The Company has an experienced, expert board of directors combined with exploration, development and operating teams with extensive track records of discovering, developing and operating high grade, profitable underground mines. TMAC’s shares trade on the Toronto Stock Exchange under the trading symbol TMR.


For the Doris and Boston drilling campaigns, samples were prepared at ALS Laboratories in Yellowknife, Northwest Territories, and assayed at their Vancouver, British Columbia laboratory (an ISO/IEC 17025 accredited lab for gold analysis). Analysis for gold is completed on sawn half core samples (NQ) using 50 gram fire assay with atomic absorption (AAS) finish. Samples with higher grade gold (>100 g/t) are re-assayed using the pulp and fire assay with gravimetric finish procedures. Samples with visible gold, and surrounding samples are analyzed using screen metallics (1000 g of material is screened to 100 microns, with all +100 micron material analyzed and two samples of -100 micron analyzed by 50 g fire assay with AAS finish, results are averaged based on weight). The Company control checks include the insertion of standard reference materials and blank samples to monitor the precision and accuracy of the assay data. For a complete description of TMAC’s sample preparation, analytical methods and QA/QC procedures please refer to TMAC’s annual information form, dated February 23, 2017 and filed on TMAC’s website at and also on TMAC’s profile at


Information of a scientific or technical nature in respect of the Hope Bay Project, other than new information related to Doris mine development, is based upon the Hope Bay Technical Report, as filed on TMAC’s profile at Scientific and technical information contained in this document was reviewed and approved by David King, P.Geo., the Vice President, Exploration and Geoscience of TMAC who is a “Qualified Person” as defined by National Instrument 43-101 – Standards of Disclosure for Mineral Projects.


This release contains "forward-looking information” within the meaning of applicable securities laws that is intended to be covered by the safe harbours created by those laws. “Forward-looking information” includes statements that use forward-looking terminology such as “may”, “will”, “expect”, “anticipate”, “believe”, “continue”, “potential” or the negative thereof or other variations thereof or comparable terminology. Such forward-looking information includes, without limitation, bringing the timing for bringing Madrid and Boston into production and the rate of ramp up at Doris throughout 2017.

Forward-looking information is not a guarantee of future performance and management bases forward-looking statements on a number of estimates and assumptions at the date the statements are made. Furthermore, such forward-looking information involves a variety of known and unknown risks, uncertainties and other factors, which may cause the actual plans, intentions, activities, results, performance or achievements of the Company to be materially different from any plans, intentions, activities, results, performance or achievements expressed or implied by such forward-looking information. See “Risk Factors” in the Company’s Annual Information Form dated February 23, 2017 filed on SEDAR at for a discussion of these risks.

Source: TMAC Resources Inc.

TMAC Resources Inc.

Catharine Farrow, 416-628-0216

Chief Executive Officer


Ann Wilkinson, 416-628-0216

Vice President, Investor Relations


Renmark Financial Communications Inc.

Daniel Gordon: 416-644-2020 or 514-939-3989

Stay Informed

Email Address: *
Mailing Lists *

Enter the code shown above.



Privacy Statement

TMAC Resources Inc.  (“TMAC”) values your privacy. This policy statement governs our practices with respect to the collection, use and disclosure of personal information on the Careers section of the TMAC web site.

Personal information is information that is personally identifiable to you and may include your name, e-mail address, phone number and mailing address, as the case may be. Personal information does not include the name, title or business address or telephone number of an employee of an organization. TMAC is not asking you to reveal any personal information while visiting our Careers site. On a voluntary basis, you may provide and disclose personal information to us in using the Careers section of this site.

TMAC will never disclose, sell or lease to any third party, any personal information that you provide on this site without your permission, unless required to do so by law.

When you submit a profile on the Careers section of this site you will become a registered user. By submitting your profile on the Careers section of this website you are consenting to TMAC’s collection and use of your personal information for the purpose of considering you for career opportunities with TMAC. You will be able to view, change and update the personal information that you have previously provided and disclosed at any time.

If you have previously provided us with personal information and wish to verify or remove your personal information, please contact us using the information provided at the end of this Privacy Policy.

TMAC treats your personal information as private, confidential information and strives to ensure that such information is protected at all times. TMAC is diligent in its efforts to protect your personal information, however as data transmission over the Internet is not secure, TMAC cannot guarantee that such information will not be lost, used unlawfully or modified in a fraudulent manner. Consequently, TMAC bears no liability for the use that may be made of the information by you or any third party.

TMAC reserves the right to change this Privacy Policy Statement as it deems necessary and without prior notice. Any changes made to this Privacy Policy Statement will be in compliance with privacy laws in effect in Canada and will be posted on this page.

External Links
This site may contain links that take you to third party websites. This Privacy Policy Statement does not extend to the data collection practices of third parties and TMAC does not assume any responsibility for the privacy practices, policies or actions of third parties. TMAC recommends reading such third party privacy policies to make an informed decision as to whether or not you wish to use these sites based on their privacy practices.

Contact Us
If you have any questions regarding TMAC’s Privacy Policy Statement or practices, please contact us by phone at 416-628-0216, or by e-mail at or in writing at TMAC Resources Inc. 95 Wellington Street West, Suite 1010, P.O. Box 44, Toronto, Ontario, M5J 2N7

By providing and disclosing personal information on the Careers section of TMAC’s website I agree with this Privacy Policy. I certify that the statements and answers provided by me in this application form and any supporting documents are true and complete. I understand and agree that false information may disqualify me from employment, or after employment, result in disciplinary action, to the extent permitted under applicable law, up to and including termination.